Can We Wash Polyresin Statues？

Placing statues and sculptures in your yard or garden can add a whimsical and elegant touch to your outdoor area. Over time, the weathered appearance of the statue will add architectural flair and vintage charm, but there will come a time when the statue will require cleaning and maintenance. Regular cleaning and maintenance of your outdoor statue can extend its lifespan and maintain its appearance.

So when should you clean your statue?

It is important to clean your outdoor sculpture regularly. Cleaning your statue will make it last longer and look better for years to come. Some experts recommend cleaning and maintaining your outdoor statue every time you mow the lawn. Doing so will help you establish a garden care routine and get the most out of your outdoor statue. When cleaning your statue, be sure to check for any cracks or imperfections that can lead to bigger problems, such as mold growth or cracked sculptures.

Tips for cleaning different types of statues

Cleaning outdoor statues should be an easy and routine part of lawn maintenance. Here are some general guidelines to keep in mind when caring for your statue.

Be gentle when scrubbing the statue. Too much pressure can cause it to crack, chip, or even break.

Use a garden hose to rinse the statue in a gentle environment such as a shower or mist. Never use a powerful washer. A power washer that is too powerful can damage the details or destroy the statue.

While there are cleaning products specifically made for statues, you can find more cost-effective options at home. To keep the statue looking new, use a household cleaner such as dish soap.

How to clean a statue depends on the type of material the statue is made of. To properly clean your statue, follow the steps below for each type of material.

resin

1) Rinse with a hose on a gentle spray setting.

2) Mix a small amount of dish detergent with warm water.

3) Wipe the dirt off the Buddha statue with a soft cloth or sponge.

4) Rinse with the hose again.

5) Dry the statue with a soft cloth. This also prevents streak marks.

concrete

1) Use a garden hose to gently mist the statue with water.

2) Add some dish detergent to warm water and mix.

3) Gently rub the surface using a soft cloth or sponge.

4) Dry the statue with a clean towel or let it air dry if the outside temperature is warm and dry.

wood

1) Gently rinse with a garden hose.

2) Wash the sculpture with a little dish detergent and warm water. Be sure to polish in the direction of the wood grain.

3) Rinse with a hose.

4) Wipe with a towel and start drying. It is best to lift the statue into the air and allow it to dry completely.

5) Once the statue is completely dry, apply a polyurethane or other protective top coat to preserve and protect the wood.

marble

1) Mix a small amount of dish detergent with hot water.

2) Use a soft cloth to wipe dirt and other debris off the statue.

3) Gently rinse with a garden hose.

4) Dry the statue with a clean, soft towel to prevent streak marks.

bronze

1) Mix nonionic detergent, water, and dishwashing detergent.

2) Wipe the dirt with a soft cloth. If necessary, use the cordless brush to clean hard-to-reach or difficult areas.

3) Leave the soap on the statue for a few minutes. Use the garden hose to water the statue.

4) Dry the statue with a clean soft cloth. Let it dry for 2 days to make sure the moisture is completely gone.

5) Once dry, use a brush to apply wax to the statue. Let the wax dry for 20 minutes, then buff the surface with a cloth.

Protect statues and sculptures from natural disasters

All statues and sculptures deteriorate and dull over time due to constant exposure to the elements. Some landscape enthusiasts desire the weathered look created by this exposure to give gardens, patios, and other outdoor spaces a vintage, timeless look. However, if it weathers too much, the statue can crack, grow moss or mold, change color, and deteriorate over time. Slowing down the process To slow down the weathering process, applying a sealant to your statue can prolong or prevent weathering damage (if maintained consistently). Make sure your sculpture is clean and completely dry before applying a protective coating to it. Use a soft brush or cloth to apply the sealant.

Keeping your outdoor garden statues clean will help them last longer. Maintaining the appearance of your garden sculptures is necessary not only to keep your garden beautiful, but also if you want your sculptures to last year after year.